幸运飞艇代理
专注于工业润滑油\工业润滑脂\工业润滑剂一站式采购 电话:0755-21014659 手机:13590131039 熊先生
产品导航
Castrol Tribol 890/1150合成空气压缩机油详细说明 (浏览585次)
CASTROL TRIBOL
?
890?
Synthetic compressor oils
DESCRIPTION
CASTROL TRIBOL
?
890 compressor oils are fully synthetic lubricants formulated for long service life and clean deposit-free
operation. They are manufactured in several viscosity grades to satisfy the lubrication needs of essentially all air compressors
and compressors of many other process gases as well.
CASTROL TRIBOL
?
890/32, 890/46 and 890/68 for rotary compressors and vacuum pumps
CASTROL TRIBOL
?
890/100 for reciprocating compressors, vane compressors and vacuum pumps
· The base fluids in CASTROL TRIBOL
?
890 are made form polyol and dibasic-acid ester, synthesized and blended
specifically to optimize properties vital to good compressor operations. They have a natural stability against
decomposition and oxidation at high operating temperatures and thus a low tendency to form lacquers or deposits. The
synthetic base fluids also have very low volatility and high flash and self-ignition temperatures.
· CASTROL TRIBOL
?
890 oils are designed for excellent natural oil film strength and lubricity and are additionally
formulated with load carrying, antiwear additives. An advanced technology additive system also enhances oxidation
stability, inhibits foaming and protects against corrosion. CASTROL TRIBOL
?
890 oils re not corrosive to either ferrous or
non-ferrous metals.
APPLICATIONS
· Rotary vane and rotary screw compressors: where circulation systems inject oil directly into the air stream to lubricate,
cool and seal the compressor, CASTROL TRIBOL? 890/32, 890/46 and 890/68 perform better than petroleum oils in
flooded rotary vane and screw compressors. By minimizing varnish and carbon deposits, it can extend drain intervals from
1,000 hours to more than 5,000 hours in most vane compressors and sometimes to well over 8,000 hours in flooded
screw compressors.
· Reciprocating compressors: CASTROL TRIBOL? 890/100 is used for both crankcase and upper cylinder lubrication in
reciprocating compressors. Crankcase drain intervals can be greatly extended and significant reduction ins valve
inspections and cleaning are possible. Lower volatility permits lower feed rates to reduce carryover and deposit formation.
· Hydraulic and circulating systems, gears, bearings: wherever rust and oxidation inhibited (R&O) turbine type of circulating
oils are specified. CASTROL TRIBOL? 890 is particularly well suited where operating temperatures and ranges are
extreme or marginal for petroleum oils.
ADVANTAGES
· In rotary vane and rotary screw compressors: lower volatility means less oil contamination of plant air, greater demister
efficiency, less maintenance of filters and separators and reduced oil consumption.
· Superior oxidation stability and natural cleansing action prevent the formation and buildup of varnish, sludge or deposits.
This minimizes wear and maintains clearances for maximum compressor efficiency and for optimum cooling and sealing.
· In single or multiple-stage reciprocating compressors: formation and buildup of varnish and carbon deposits are all but
eliminated to prevent valve wear or sticking which allows recompression and provides clean intercoolers. The resulting
benefits are less heat generation and reduced fire potential as well as reduced energy input required for constant
discharge capacity and overall improved compressor efficiency.
· General advantages in all operations:
· Greatly extended oil life in circulation systems and crankcases – 4 to 8 times longer than petroleum oils.
· Lower maintenance and labor costs incurred from less frequent oil change, filter and accessory service, inspection and
removal of deposits and parts replacement.
· Improved profits from fewer production interruptions.
· Year-round service from a single product with extreme low and high temperature range.
· Compatibility with virtually all seals and construction materials used in modern compressor system.
Product DataTribol 890
14.04.2008
Castrol Tribol 890 and Castrol logo are trademarks of Castrol Limited, used under licence.
Die technischen Daten sind Durchschnittswerte, die jedoch innerhalb der festgelegten Spezifikation liegen.
Diese Angaben entsprechen umfangreichen Prüfungen und Praxiserfahrungen. Bei der Vielfalt der Anwendungen kann daraus keine Verbindlichkeit für die Bew?hrung in jedem Einzelfall hergeleitet werden. Praxiserprobungen empfohlen.
?nderungen der Zusammensetzung bleiben Vorbehalten, gegebenenfalls in Absprache mit dem Kunden.
Weitere Produkt-Informationen sind bei der Anwendungstechnik der Deutsche BP Aktiengesellschaft zu erfragen.
Deutsche BP AG – Industrial Lubricants & Services, Erkelenzer Str. 20, 41179 M?nchengladbach
Tel: +49 (0)2161 909-30 Fax: +49 (0)2161 909-481
castrol.com/industrial
Page 2 of 2
Notes for use
· Changeover from petroleum oils to CASTROL TRIBOL? 890 should always be preceded by a very thorough cleanout. Although 890 oils are compatible with petroleum, any residual mineral oil will soon oxidize
and contaminate CASTROL TRIBOL? 890, shortening the anticipated service life.
· CASTROL TRIBOL? 890 oils soften polycarbonate and should not be used with this material.
· Under no circumstances should these fluids be used where neoprene seals and E.P.D.M. elastomers sealing materials are present anywhere in the air system
·
Technical data
Unit Value Test method
CASTROL TRIBOL
?
890 - 890/32 890/46 890/68 890/100 -
ISO viscosity grade - 32 46 68 100 DIN 51519
Density at + 15°C kg/m? 1001 982 968 960 DIN 51757
Viscosity at + 40°C
+ 100°C
mm?/s
30.4
6.1
46
7.2
68
8.6
100
9.5
DIN 51366
Flash point °C 243 250 254 260 DIN ISO 2592
Fire point °C 280 280 282 290 DIN ISO 2592
Pour point °C - 51 - 39 - 33 - 33 DIN ISO 3016
Self-ignition temperatures °C 410 410 410 427 -
Conradson carbon residue (finished oil) wt. % 0.05 0.04 0.02 0.02 DIN 51551
Copper corrosion (100 A3) - 1 DIN 51759
Four ball wear test (1 h, 40 kg, 1800 min
-1
, 75°C)
Wear scar diameter
mm 0.5 ASTM D 2266
Characteristics of distillation residue after distillation
of 80 vol.%
Conradson carbon residue
Kinematic viscosity at 40°C
w. %
mm?/s
-
-
-
-
-
-
0.18
170
DIN 51356
Ageing characteristics
Increase of Conradson carbon residue
after ageing by passing air
wt. % - - - 0.21 DIN 51352 part 1
Conradson carbon residue after ageing by passing air through the
oil in the presence of iron oxide
wt. % - - - 0.55 DIN 51352 part 2
Demulsibility (43-37-0) - pass DIN 51599
上一产品: Shell Corena S4 R32,R46,R68
下一产品: 道达尔TOTAL DACNIS SH100合成空气压缩机油
版权所有:幸运飞艇代理 地址:深圳市龙华新区大浪街道华联社区龙苑新村二区
联系人:熊先生 手机:13590131039 网址: 邮箱:xionghuayun@126.com 邮编:518000
关键词:鑫华源润滑油官方网站一站式工业润滑油/高温润滑脂/工业润滑剂供应商 电话:0755-21014659 传真:0755-21014659